Please fill out the form to request a quote. We’ll contact you shortly.
Wrought Iron Automatic Sliding Gates
The Madoors USA Wrought Iron Automatic Motorized Sliding Gate is a custom-manufactured, hot-dip galvanized and powder-coated wrought iron sliding gate system available in conventional floor-tracked and cantilever trackless configurations — adding distinctive style, security, and property value to residential driveways, commercial premises, and any entrance where swing gates are not feasible due to space restrictions. Every gate is factory-manufactured in Türkiye with thorough pre-installation quality inspection, hot-dip galvanized for complete rust protection, and powder-coated in any color to match the property and surroundings — with quality hinges, bolts, and hardware engineered to handle the operational stress of sometimes heavy wrought iron gate configurations over a long service life.
Both gate types can be fully automated for motorized remote control operation and opened manually in the event of power failure. All forms of access control — intercoms, ground loops, key fobs, card readers, and keypads — can be integrated to complete a safe, convenient automated sliding gate system. Full site risk assessment is provided for every electric sliding gate installation — on-site or from property images — ensuring the most comprehensive safety solution for each specific gate configuration and property layout.
TECHNICAL SPECIFICATIONS
Madoors USA Wrought Iron Automatic Sliding Gates are available in two fundamental configurations — conventional floor-tracked and cantilever trackless — with both types available in automated motorized and non-motorized manual operation.
The conventional floor-tracked configuration uses wheels on the bottom gate frame that run along a floor track installed across the full entrance width and as much again alongside the entrance for the gate to fully open and close. The floor track provides continuous structural support for the gate leaf throughout the full travel range — allowing heavier and wider gate constructions than cantilever alternatives at the cost of the floor track installation across the driveway surface.
The cantilever trackless configuration requires only a concrete foundation block to mount the carriages — which run in a track welded to the bottom of the gate frame — with a calculated overhang to balance the gate. The gate opens and closes completely without any track in the driveway floor — avoiding driveway disruption, eliminating floor track maintenance, and providing a cleaner aesthetic at the entrance approach. All that is needed in the ground is the foundation block for the carriage mounting posts — significantly simpler civil works than the full-width floor track of the conventional type.
All wrought iron gate panels are hot-dip galvanized — providing comprehensive corrosion protection throughout the steel section from the point of manufacture, including all cut edges, weld zones, and internal hollow sections. Powder coating in any specified color is applied over the galvanized surface — providing a durable, UV-resistant color finish that matches the property exterior, landscaping, and architectural character.
KEY FEATURES
Custom Manufactured Wrought Iron — Unique Design Character
Every Madoors USA wrought iron sliding gate is custom manufactured to the specific design, dimensions, and aesthetic requirements of the individual property — providing a gate that is genuinely unique rather than a standard catalog product adapted to the site. The wrought iron medium — known for its ability to be formed into curves, scrolls, spears, and decorative elements — provides design possibilities that steel sheet and aluminum profile gates cannot match, capturing the essence of both traditional craftsmanship and contemporary modernity in the same gate design.
Conventional Floor Track & Cantilever Trackless Options
Both gate types — floor tracked and cantilever — are available in automated and manual configurations, covering the full range of site constraints and installation preferences. Floor tracked gates for maximum structural support of the heaviest wrought iron designs. Cantilever trackless for driveway surface preservation, lower maintenance, and the cleaner aesthetic of a gate that travels entirely above ground level. Both types can be automated with the same motor opener and access control options.
Hot-Dip Galvanized — Complete Rust Protection
Hot-dip galvanization of all wrought iron and steel components provides comprehensive rust protection throughout the gate structure — covering every surface, edge, weld, and hollow section with the protective zinc layer that prevents corrosion in outdoor exposure conditions. Hot-dip galvanization is superior to paint or spray galvanizing for the rust protection of ornamental wrought iron gates because it penetrates all the complex surface geometry of the decorative ironwork without leaving unprotected recesses and shadow areas that spray application would miss.
Powder Coating — Property Color Match
Powder coating in any specified color allows the gate finish to be matched precisely to the property exterior color scheme — house paint colors, brick tones, architectural metalwork colors, or any other specified color. Powder coating over hot-dip galvanization provides a durable, long-lasting color finish that resists the UV fading, chipping, and peeling that affect standard paint finishes on outdoor metalwork.
Automated Motorized Operation — Manual Power Failure Backup
Both conventional and cantilever gate types can be automated with motorized drive systems — providing remote control convenience for vehicle operators who can open and close the gate without leaving their vehicle. Manual backup operation during power failure ensures that the gate remains functional as an access control device regardless of electrical supply status — the gate can be opened and closed by hand without motor assistance during power outages.
Full Access Control Integration — Intercom, Ground Loops & Key Fobs
All forms of access control integrate with the automated sliding gate system — intercoms for audio and video verification of visitors before gate opening, ground inductive loop detectors for vehicle detection and automated closure, key fobs for remote wireless activation from approaching vehicles, card readers for credential-based access management, and keypads for PIN-code visitor access. This comprehensive access control integration capability allows the gate to serve as the complete property access management system rather than a simple motorized gate.
Site Risk Assessment — On-Site or Remote
A full site risk assessment is provided for every electric sliding gate installation — conducted on-site for new installations or remotely from property images and dimensions for remote or international clients. The risk assessment identifies the safety requirements specific to the gate location — vehicle approach speeds, pedestrian usage patterns, children and disability considerations, and operating environment hazards — and advises on the most comprehensive safety solution for the confirmed conditions. This risk assessment approach ensures that the automated gate installation meets all applicable safety standards for electric gate systems.
Quality Hardware — Hinges & Bolts Engineered for Gate Loading
The hinges, bolts, and structural hardware used in Madoors USA wrought iron gates are specifically selected and engineered for the loading conditions of heavy wrought iron gate construction — with hinge and pivot hardware sized to carry the gate weight without deflection, wear, or failure over the full service life. Quality hardware is specifically noted as a key quality criterion because the operational reliability and safety of the gate depend entirely on the hardware maintaining the gate in the correct alignment and preventing uncontrolled gate movement under wind loading and motor drive forces.
Security, Style & Property Value
Wrought iron gates and fencing add security through the structural strength of the iron construction, style through the distinctive ornamental character of the ironwork design, and property value through the premium visual quality that wrought iron entrance gates add to the property approach and street facade. The combination of security and aesthetic value makes wrought iron automatic sliding gates the premium choice for properties where the entrance is a significant architectural and visual element of the property identity.
ASSEMBLY & INSTALLATION SEQUENCE
Design Consultation & Custom Gate Specification
Gate design — scrollwork, spears, panels, and decorative elements — opening width, gate height, conventional or cantilever configuration, automated or manual operation, access control requirements, powder coat color, and foundation specification are confirmed with the client.
Site Assessment & Risk Assessment
Site visit or remote image assessment is conducted to confirm gate layout, motor position, access control device locations, and site-specific safety requirements. Risk assessment documentation is completed and the comprehensive safety solution is confirmed.
Foundation & Track Works
For conventional configuration — floor track excavation and installation across the entrance and run-back width. For cantilever configuration — concrete foundation block construction for carriage mounting posts. Motor drive unit foundation position is prepared.
Gate Manufacturing & Quality Inspection
Custom wrought iron gate is manufactured at the Madoors USA factory to the confirmed design specification. Hot-dip galvanization is applied to all components. Powder coating in the specified color is applied over the galvanized finish. Thorough quality inspection is completed before the gate leaves the factory.
Gate Installation & Motor Connection
Gate is installed on the floor track wheels or cantilever carriage system. Motor drive unit is installed and connected to the gate. Gate travel, carriage engagement, and motor connection are verified through multiple complete open and close cycles.
Access Control Installation & Programming
All specified access control devices — intercom, ground loops, key fobs, card readers, keypads — are installed and connected to the motor control system. Programming and testing of all access control functions are completed.
Safety System & Power Failure Testing
Safety sensors, obstruction detection, and emergency stop systems are installed, calibrated, and tested. Manual operation during simulated power failure is verified. Risk assessment safety recommendations are confirmed as implemented.
Final Inspection & Handover
Complete operational testing across all motor, safety, and access control functions is conducted. Quality workmanship of the wrought iron fabrication, galvanizing, and powder coating is inspected at the installed position. Installation handover documentation is completed.
DEPLOYMENT SCENARIOS & USE CASES
Madoors USA Wrought Iron Automatic Sliding Gates are specified for any residential, commercial, or institutional property entrance requiring custom wrought iron automated sliding gate security and style.
- Residential driveway wrought iron automatic sliding gates
- Private estate and villa entrance motorized wrought iron gates
- Gated community and residential compound entrance gates
- Commercial property and business premises entrance gates
- Hotel and hospitality property main entrance gates
- Corporate headquarters and office complex vehicle gates
- School and educational institution entrance gates
- Healthcare facility and hospital driveway gates
- Church and religious institution entrance gates
- Sports club and leisure facility entrance gates
- Agricultural and rural estate property entrance gates
- Heritage property and listed building entrance gates
- Luxury apartment complex driveway entrance gates
- Retail and commercial park entrance wrought iron gates
- Any property requiring custom premium wrought iron automated gate
- Category: Sliding Gate